$1,000

Screw conveyor"KPH/1" (hereinafter referred to as "Equipment") is intended forloading (feeding) walnuts into the hopper of the machine for calibrating walnuts. The equipmentis also suitable for loading (feeding) of hazelnuts,chestnuts, etc.

Capacity:

- depends on the rotational speed of screw and ranges from 250 to 1200 kg / h.

Technical characteristics

Rotational speed of screw is regulated from 0.23 to 30 rpm.

Torque on the shaft: 264 (N⋅m)

Power supply parameters: voltage (380 ± 22)V, frequency (50 ± 1) Hz;

Power consumption: not greater than 4 kW;

Dimensions:  4500 x 2500 x 1100 mm(dimensions may vary depending on the needs of the Customer in terms of thevolume of the hopper, the height of the calibrator, etc.);

Weight: up to 500 kg, depending on the agreedsizes of the hopper.